Learning Centre
Installation
What happens on install day, cable routing, standards and compliance.

A compliant install is a dedicated, protected circuit, tested and certified — most jobs take half a day.
Guides in this topic
EV charging safety at home (AS/NZS 3000, RCD/RCBO, dedicated circuits)
The safety standards and protection devices behind a compliant home EV charger installation in Australia, explained in plain terms.
What this topic covers
Site assessment
The electrician checks switchboard capacity, cable route and parking position, often from photos.
Standards and compliance
Work follows AS/NZS 3000, including Section 7.9, and is tested and certified.
Cable routing and finish
Runs are kept short and concealed wherever practical.
Commissioning
The charger is energised, tested, updated and scheduled to your tariff before the electrician leaves.
Key facts
- EV chargers require their own dedicated circuit.
- RCD protection is mandatory on every installation.
- Typical installs take three to five hours, longer with a board upgrade.

Ready to install your EV charger?
Request a quote for your home EV charger in Newcastle.
- Free, no-obligation enquiry
- Matched with licensed NSW electricians
- Installed to AS/NZS 3000
- Newcastle, Lake Macquarie & the Hunter
